FluoroGrip® – P (PTFE)
Our Products
- FluoroGrip® – P (PTFE)
- FluoroGrip® – E (ECTFE)
- FluoroGrip® – F (FEP)
- FluoroGrip® – F Optically Clear (HD-FEP) Teflon®
- FluoroGrip® – PV(PVDF) Kynar ®
- FluoroGrip® – MX Mebrane
- FluoroGrip® – PF (PFA)
- FluoroGrip® – LS-1000 Lightning Strike Film
Discover FluoroGrip® - P(PTFE)
What is FluoroGrip® - P(PTFE)?
FluoroGrip® is an oxy-fluoropolymer of polytetrafluoroethylene modified to incorporate hydroxyl groups with an acrylic or silicone pressure sensitive adhesive.
Types
FluoroGrip® – P sheets and films are manufactured from virgin grade polytetrafluoroethylene (PTFE) resins modified to incorporate hydroxyl groups to create an oxy-fluoropolymer.
The base polymers are molded, sintered and skived to the appropriate thickness. FluoroGrip® – P skived exhibits minimal skive lines and has high tensile and elongation strengths. Both sheet and film are widely used in a number of industries due to the material’s outstanding characteristics, including heat and chemical resistance, dielectric strength, and antistick properties. The softness and flexibility properties create a versatile paint replacement film.
FluoroGrip® – P is available standard with an advanced pressure sensitive adhesive (PSA) of acrylic or high temperature resistant silicone PSA. Special chemical resistant adhesives are available. Consult Integument Technologies for specific material recommendations. FluoroGrip® – P is available with either a single-sided or doublesided surface plasma modification treatment.
Industrial Uses
FluoroGrip® – P film is supplied either in sheet or continuous roll form. The excellent temperature and chemical resistance make it an ideal material for use in a variety of aggressive chemical and temperature environments.
The outstanding chemical and thermal resistance combined with superior elongation properties makes it an excellent candidate for secondary containment liners, and splashand-spill ultra-high-performance paint replacement or as an underlayment to chemical resistant toppings, acid brick and coating systems. Fabricated shapes and contours can be produced via heat sealing and thermoforming.
The superior non-stick surface, chemical resistance, and 300-400˚F (depending upon adhesive) usage temperature make FluoroGrip® – P an ideal release film for linings and exterior ultra-high performance anti-graffiti paint replacement where a “non-stick” surface is desirable or for equipment usage where a low coefficient of friction is desired. FluoroGrip® – P with silicone adhesive is the material of choice for lining tanks and process equipment in concentrated ozone environments.
Double-sided treatment is especially useful when installations require seams, overlaps or the application of chemical resistant coatings or toppings. The double-sided modification makes it an ideal material for pipe wraps and tapes and immersion linings. The modification also creates a superior surface for use as a chemical and temperature resistant underlayment or membrane where the application of chemical resistant toppings and acid brick permits its use in traffic and secondary containment lining applications.
Physical Properties
General
| ASTM Method | Metric Value | Metric Units | English Value | English Units | |
|---|---|---|---|---|---|
|
Specific Gravity |
D-4894/
4895 |
2.16 |
|
2.16 |
|
|
Flammability |
UL-94 |
V-0 |
|
V-0 |
|
|
Water Absorption, 24hr |
D-570 |
<0.01 |
% |
<0.01 |
% |
Mechanical
| ASTM Method | Metric Value | Metric Units | English Value | English Units | |
|---|---|---|---|---|---|
|
Tensel Strength |
D-4894/
4895 |
31.0 |
MPa |
4500 |
Psi |
|
Elongation |
D-4894/
4895 |
400 |
% |
400 |
% |
|
Fold Content (M.I.T.) |
D-2176 b |
Did not break @ 10″ |
cycles |
Did not break @ 10″ |
cycles |
Thermal
| ASTM Method | Metric Value | Metric Units | English Value | English Units | |
|---|---|---|---|---|---|
|
Continuous Service Temp.* |
|
A 170 | S 250 |
˚C |
A 338 | S 482 |
˚F |
|
Specific Heat |
D-4591 |
1.2-1.5 |
kJ/kg•K |
0.29-0.37 |
Btu/lb˚F |
|
Degradation Temp.• |
|
A 180 | S270 |
|
A 356 | S 518 |
˚F |
|
Coefficient of Linear Thermal Expansion |
E-228 |
10 x 10–5 |
mm/mm°C |
7 x 10–5 |
in/in°F |
|
Thermal Conductivity |
D-435 |
0.25 |
W/m•K |
1.7 |
Btu•in/h•ft2•˚F |
* A = Acrylic Adhesive S = Silicone Adhesive
Notes
Refer to FluoroGrip® installation manual and instruction guide for the use and installation of FluoroGrip® films, membranes and lining systems.
Certifications
FluoroGrip® – P is designed to meet the requirements to comply with the FDA’s Register of Food Additive
Regulations.
Disclaimer The information printed herein is furnished free of charge and is based on technical data that Integument Technologies, Inc. believes to be reliable. It is intended for use by persons having technical skill, at their own discretion and risk. The handling precaution information contained herein is given with the understanding that those using it will satisfy themselves that their particular use conditions present no health or safety hazards. While the information contained herein is believed to be correct, Integument Technologies, Inc. makes no representation as to the accuracy of it. Since the conditions of product use are beyond our control, Integument Technologies, Inc. assumes no liability in connection with any use of this information. The evaluation of the product described herein under end-use conditions prior to specifications is essential. Nothing contained herein is to be taken as a license to operate under or as a recommendation to infringe any patents.
Warranty Integument Technologies, Inc. warrants that at the time of shipment, its products are free of
defects in material and workmanship. THERE IS NO OTHER EXPRESS WARRANTY SELLER HEREBY DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR ANY PARTICULAR PURPOSE INDICATED BY BUYER TO SELLER. Seller’s sole obligation under this warranty shall be, upon prompt written notice by Buyer of any defect or defects, and inspection,
if required by Seller, to replace FOB Seller’s plant, or at Seller’s option to allow credit for any defective products expressly warranted herein against defects by Seller UPON PURCHASE OF SELLER’S PRODUCT(S), IT
IS EXPRESSLY AGREED UPON BY BUYER THAT THIS REMEDY OF REPLACEMENT OR CREDIT, AT SELLER’S OPTION, IS BUYER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY, IN NO EVENT SHALL SELLER BE LIABLE FOR CONSEQUENTIAL DAMAGES.